70
_ maintaining your appliance
remoViNG AND repLAciNG tHe WArmiNG DrAWer
(moDeL NX58H5650W*)
to remove and clean the warming drawer
1.
Pull out the drawer until it stops.
2.
Locate the locking clips near the
back of each full-extension roller
guide rail. Using two hands, push
down on the left clip and lift up on
the right clip to release the clips.
Pull the drawer the rest of the way
out.
3.
Clean the drawer in warm, soapy
water. Rinse and dry thoroughly.
to replace the warming drawer
1.
Position the ends of the full-extension
roller guide rails in the side rails in the
drawer opening.
2.
Push in the drawer to close it and snap the locking
clips into place.
right roller guide rail
right drawer
locking clip
Left drawer locking
clip