manualshive.com logo in svg

Samsung NX15PRTV05, User Manual, Page: 179 / 257

Share
Download
Samsung NX15PRTV05 User Manual Download Page 179

4-4

Manual

Configuring the Network Environment Settings
for Wired LAN Connections 

A wired LAN environment is an environment where you can connect to the
Internet using the company’s LAN or with a broadband modem.

1. Connect the network (LAN) cable to the LAN port of the system.

2. Click Start > Control Panel.
3. Select Network and Internet Connections in the [Control Panel] window.
4. Click Network Connections in the [Network and Internet Connections] 

window.

5. In the [Network Connections] window, point the mouse pointer to Local Area 

Network and click the right touchpad button. Select Properties from the popup
menu that appears.

6. In the General tab of the [Local Area Connection Properties] window, check that

the connecting device field includes the Intel

PRO/100VE Network

Connection 

driver.

Summary of Contents for NX15PRTV05


































































































































































































































































Reviews:

No comments