English 25
Sur
fac
e c
ooking
Hot surface indicator
•
Comes on when the unit is turned on or hot to the touch.
•
Stays on even after the unit is turned off.
•
Glows until the unit is cooled to approximately 150 °F.
Cooktop on/off lamp
•
The lamp turns on when the surface control knobs are not in off position.
•
The lamp turns off when the surface control knobs are in off position.
Cooking areas
•
The cooking areas on your range are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
•
Pans should not extend more than ½" to 1" beyond the cooking area.
•
When a control is turned on, you can see a glow through the glass cooking
surface.
The element will cycle on and off to maintain the preset heat setting,
even at high settings.
•
For more information on selecting proper types of cookware, refer to the
section
.
How to set the appliance for surface cooking
CAUTION
•
The surface elements may be hot even when off and burns can occur. Do not
touch the surface elements until they have cooled down sufficiently.
•
At high or medium-high settings, never leave food unattended. Boilovers cause
smoking and greasy spillovers may catch on fire.
•
Be sure you turn the control knob to
OFF
when you finish cooking.
•
Safety knob의 knob 버튼을 임의 고정해서 사용할 경우 본래의 안전 기능은 정상 동작 하지
않습니다.
Surface unit control knob
1
2
3
Make sure all surface burners are properly
installed. To light a burner:
1.
Pinch or Side-push the knob button.
2.
Push the knob in.
3.
Turn in either direction to the setting you
want.
3
3
Single surface unit
Dual surface unit
•
(A) : Large burner setting
•
(B) : Middle burner setting
Knob button
Knob button
Summary of Contents for NSE6D 83 Series
Page 1: ...Electric Range User manual NSE6D 83...
Page 65: ...Memo...
