English 43
Oper
ating the o
v
en
NOTE
•
You can change the oven temperature once baking starts, but the display will
not change or beep. After changing the temperature, it takes 15 seconds before
the oven recognizes the change.
•
You can turn off the oven at any time by press
Stop/Clear
. However, this
doesn’t deactivate the Sabbath feature.
•
You can set the cooking time before activating the Sabbath feature.
•
After a power failure, the oven will not resume operation automatically.
'Sabbath' will appear in the control panel, but the oven will not go back on. Food
can be safely removed from the oven, but you should not turn off the Sabbath
feature and turn the oven back on until after the Sabbath/Holidays.
•
After the Sabbath observance, turn off the Sabbath feature by pressing and
holding
Bake
and
Num 1
for at least 3 seconds.
•
You can change the temperature by 5 °F.
CAUTION
•
Do not attempt to activate any other functions except for Bake when the
Sabbath feature is on. Only the following functions will function properly: Bake,
Oven Start, and Oven Stop.
•
Do not open the oven door or change the oven temperature for about
30 minutes after you have started the Sabbath feature. Let the oven reach
the set temperature. The oven fan operates only when the oven temperature
increases.
To enable the Sabbath feature
1.
Press
Bake
.
The default temperature is 350 °F.
2.
Enter the temperature you want, e.g., 375 °F, by using the number pad.
3.
Press
Start/OK
.
The temperature display will start to change once the oven temperature reaches
175 °F.
4.
Press
Bake
and
Timer
at the same time for 3 seconds.
The display will show
SAb
.
Once SAb appears in the display, the oven will not beep or display any further
changes.
You may change the oven temperature once baking has started. Remember that
the oven will not beep or display any further changes once the Sabbath feature
is engaged.
5.
You can turn the oven off at any time by pressing
Stop/Clear
. This will turn only
the oven off. If you want to deactivate the Sabbath feature, hold down
Bake
and
Timer
at the same time for 3 seconds. Sab will disappear from the display.
Summary of Contents for NSE6D 83 Series
Page 1: ...Electric Range User manual NSE6D 83...
Page 65: ...Memo...
