Samsung NP300u1a User Manual Download

Page: 45 / 136

Chapter 2.

Using the computer

Touchpad

Setting the Touchpad Sensitivity

If the touchpad reacts too sensitively or the pointer moves

unintentionally, please adjust the touchpad pointer speed and

sensitivity.

Adjusting the Touchpad Pointer Speed

Click

Start > Control Panel > Hardware and Sound > Mouse >

Pointer Options

and then adjust the pointer speed.

Adjusting the Touchpad Palm Detection Function

The palm detection function is to avoid malfunctions when the

palm touches the touchpad by mistake.

This function is provided by the touchpad driver provided by

the manufacturer.

►

When using the Elan driver

Click

Start > Control Panel > Hardware and Sound > Mouse

> ELAN > Options > PalmTracking

and then adjust the

sensitivity.

►

When using the Sysnaptics driver

Click

Start > Control Panel > Hardware and Sound > Mouse

> Device Settings > Settings > Pointing > Sensitivity >

PalmCheck

and then adjust the sensitivity.

Minimum

Maximum

When the touchpad pointer moves unintentionally (excessively):

Slide the bar appropriately in the direction of Maximum.

When the touchpad pointer does not move smoothly:

Slide the bar appropriately in the direction of Minimum.

Summary of Contents for NP300u1a









































































































































Search results

Summary of Contents for NP300u1a

Reviews:

Related manuals for NP300u1a

Brands by name

Popular brands

Samsung NP300u1a, User Manual

Search results

Summary of Contents for NP300u1a

Reviews:

Related manuals for NP300u1a

Brands by name

Popular brands