Samsung NP300u1a User Manual Download

Page: 117 / 136

116

Chapter 5.

Appendix

If necessary, the user should consult the dealer or an experienced

radio/television technician for additional suggestions. The user

may find the following booklet helpful: “Something About

Interference.”
This is available at FCC local regional offices. Our company is not

responsible for any radio or television interference caused by

unauthorized modifications of this equipment or the substitution

or attachment of connecting cables and equipment other than

those specified by our company. The correction will be the

responsibility of the user. Use only shielded data cables with this

system.

Intentional emitter per FCC Part 15

(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless

communication devices), operating in the 2.4GHz/5GHz Band, may

be present (embedded) in your notebook system. This section is

only applicable if these devices are present. Refer to the system

label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for

use in the United States of America if an FCC ID number is on the

system label.

This device is restricted to indoor use due to its operation in the

5.15 to 5.25 GHz frequency range. FCC requires this product to be

used indoors for the frequency range 5.15 to 5.25 GHz to reduce

the potential for harmful interference to co-channel Mobile

Satellite systems. High power radars are allocated as primary users

of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar

stations can cause interference with and /or damage this device.
This transmitter must not be collocated or operate in conjunction

with any other antenna or transmitter except the installed

Bluetooth transmitter.
Operation of this device is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation of the device.

Wireless devices are not user serviceable. Do not modify

them in any way.
Modification to a wireless device will void the authorization

to use it. Contact manufacturer for service.

Regulatory Compliance Statements

Summary of Contents for NP300u1a









































































































































Search results

Summary of Contents for NP300u1a

Reviews:

Related manuals for NP300u1a

Brands by name

Popular brands

Samsung NP300u1a, User Manual

Search results

Summary of Contents for NP300u1a

Reviews:

Related manuals for NP300u1a

Brands by name

Popular brands