Samsung NP-Q310E User Manual Download Page 48

Page: 48 / 208

Touchpad

The touchpad provides the same function as a mouse and the left and right buttons of the touchpad plays the role of

the left and right buttons of a mouse.

Before You Start!

■

Use the Touchpad with your fingers. Using a sharp object may damage the Touchpad.

■

If you touch the Touchpad or press the Touchpad buttons while booting up, the Windows boot time may be extended.

Touchpad

Use to move the cursor.

Scroll Area

Plays the role of the mouse wheel.
You can scroll up and down using the
Scroll Area.

Touchpad Left Button

You can select or run a program
using this button.

Touchpad Right Button

Plays the role of the right mouse
button.

Summary of Contents for NP-Q310E

















































































































































































































Search results

Summary of Contents for NP-Q310E

Reviews:

Related manuals for NP-Q310E

Brands by name

Popular brands

Samsung NP-Q310E, User Manual

Search results

Summary of Contents for NP-Q310E

Reviews:

Related manuals for NP-Q310E

Brands by name

Popular brands