Samsung NP-Q310E User Manual Download Page 188

Page: 188 / 208

187

Verify whether the same network key (encryption

key) has been entered for both the AP and the

computer. The network key is an encryption key for

encrypting the data transmitted between the AP and

the computer. It is recommended setting the network

key manually.

► Check the AP Settings

For the AP settings, refer to the User Guide provided

by the AP manufacturer.

Verify whether the environment is suitable for using

a wireless LAN. The use of a wireless LAN may be

restricted according to the environment and distance.

Obstacles such as walls or doors affect the use of

a wireless LAN. Install the AP in a high and open

space, 50cm from the wall and far removed from any

other radio signal sources.

Verify whether the AP is operating properly.

● When the AP is not operating normally, turn off

the AP, wait a short while, and turn it on again.

● Verify whether the AP’s firmware is the most

recent version. (Contact the AP manufacturer or

the place where you purchased the AP for details

of the AP firmware.)

Verify whether the AP has been properly connected

to the network. Verify whether the network is

operating normally by connecting the wired network

cable, which has been connected to the AP, to your

computer.

Check the network key settings (encryption

key) again. When automatic code conversion (a

passphrase function) has been selected and data

communication is not functioning even with a normal

wireless connection, it is recommended entering the

network key (encryption key) manually.

Check the AP settings as follows. (The following is

recommended for a standard environment and thus

may differ according to the specific wireless network

environment.)

● When several APs are present simultaneously,

check the channel settings for each AP. When

different APs are using nearby channels,

interference may occur between the electronic

waves. Set the AP channels further apart from

each other. (Ex: Ch1, Ch5, Ch9, Ch13)

● When an AP’s SSID (Service Set ID) option is set

to “Hide”, you cannot search for that AP on the

computer. We recommend unselecting the “Hide”

option for the AP. The SSID is a name used for

distinguishing one wireless LAN from another

wireless LAN.

● It is recommended using Long Preamble.

Preamble is a signal for data transmission

synchronization. Short Preamble may be

supported by some types of APs but may cause

compatibility problems.

● It is recommended using a static IP.
● Since static channel selection is more reliable

than auto channel selection, it is recommended

using a static channel.

Summary of Contents for NP-Q310E

















































































































































































































Search results

Summary of Contents for NP-Q310E

Reviews:

Related manuals for NP-Q310E

Brands by name

Popular brands

Samsung NP-Q310E, User Manual

Search results

Summary of Contents for NP-Q310E

Reviews:

Related manuals for NP-Q310E

Brands by name

Popular brands