manualshive.com logo in svg

Samsung NP-M50, User Manual

Share
Download
Samsung NP-M50 User Manual Download Page 80

Using the Computer   61

Media Play Control Button

You can only use the Media Play Control button when a music file is being 
played.

Playing Multiple Tracks

1. Play a music file.

2. Move the focus to the left Category pane, and select the 

Play All

 button.

Playing an Audio CD

1. Insert an audio CD into the CD-ROM drive, and select 

CD

 from the Category 

pane.

2. In the right Library window, select a track to be played.

PHOTO

The procedures for viewing pictures (images) and for viewing pictures through the 
Slide Show will be described below.

1.

Select the 

PHOTO

 

menu and move to the 

All Photo

 category.

2.

In the Library window, select an image to view.
The selected image will be zoomed in on.

Viewing an Image through the Slide Show or Full Screen

In the lower menu of the zoomed-in image, select  

SlideShow

 or 

Full Screen

.

Library Pane

Category Pane

⊕

 MUSIC

You can listen to the

music files in My Playlist

or All musics while

working.

Image Files

All Photo

Media Play Control

Button

Summary of Contents for NP-M50





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands