86 Users Manual
2.
Select an icon that represents the corresponding location from the Saved Locations
window and then click
Move
.
3.
When the network settings of the selected location are applied, the new location
and the network connection information are displayed in
The detailed
Information for window
.
Sharing Internet Access
This section describes the procedures to share Internet Access.
To share Internet Access, you first have to set a sharing server and a sharing client.
When the setup is complete, you can access the Internet from the sharing client by
connecting to the sharing server.
Sharing Server
: A computer with a direct connection to the internet and a
local network connection.
Sharing
Client
: A computer that uses the Internet by connecting to a sharing
server without itself having a direct connection to the Internet.
You can connect a sharing server and a sharing client as follows.(See Figure
5 on page (p83))
To connect a sharing server and a sharing client using a wired LAN, connect
the computers with a crossover LAN cable or network hub first.
To connect through a wireless LAN, press the
<Fn>
and
<F8>
key
combination simultaneously to enable the wireless LAN. When the wireless
LAN is enabled, the
Wireless LAN Operation LED
(
) lights up.
As an example, Internet sharing procedures for
[Connection 1]
, which connect the
sharing server and the Internet through a wired LAN and connect the sharing server and
the sharing client through a wireless LAN, are described below.
Sharing Server
Sharing Client
External Internet Device
Client Device
Connection 1
Wired LAN
Wireless LAN
Connect a sharing client with the
Connection 2
Wireless LAN
Wired LAN
device that is the same as the
Connection 3
Wired LAN
Wired LAN
client device of the sharing server.
