manualshive.com logo in svg

Samsung NP-M50, User Manual

Share
Download
Samsung NP-M50 User Manual Download Page 39

20  Users Manual

 Remote Control Buttons

Buttons indicated by (*) do not work in some applications. (e.g. Standard Mode 
of AVStation premium, etc.)

 Remote Control Operating Range

The valid distance for the remote control is determined by the user environment. It is 
recommended to use the remote control within 3 meters and a 45 degree angle from the 
remote control sensor on the device.

When the remote control is not being used, keep the remote control in the 
PCMCIA slot. To keep the remote control in the slot, insert the remote control 
into the slot so that the Remote Control Signal Transmitter faces outward.

Remote Control Signal Transmitter

Power Button

Press to turn the computer

on or to enter Hibernation.

Playback Control Button

Direction Button

*

Press to move to an item.

BACK Button

*

Press to return to the

previous step.

MUTE Button

Press to mute the sound.

AVStation Button

- When the computer is turned off or in 
Hibernation status, 

AVStation now

 is 

launched. (p58)
-  When the computer is turned on, 

AVStation premium

 is launched.(p43)

ENTER Button

Press to execute the selected item.

Volume Control Button

Summary of Contents for NP-M50





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands