English 13
Using the c
ookt
op burner
s
Flame level
The flames on the burners should always stay under the cookware, and should not
extend beyond the cookware bottom at any time.
WARNING
•
Flames larger than the cookware bottom may result in a fire or physical injury.
•
When you set a burner to simmer, do not turn the burner knob quickly. Watch the
flame to make sure it stays on.
•
After turning on a surface burner, make sure that the burner has ignited even if
the knob LED is on. Adjust the level of the flame by turning the burner knob.
•
Always turn off the surface burner controls before removing cookware. All
surface burner controls should be turned OFF when you are not cooking.
•
Always turn the burners off before you go to sleep or go out.
•
If you smell gas, turn off the gas to the cooktop and call a qualified service
technician. NEVER use an open flame to locate a leak.
•
If the LED on the control knob doesn't go on when the surface burner has ignited,
call a qualified service technician.
•
If the knob LED illuminates, but the surface burner does not ignite, turn off the
control knob immediately.
•
Do not operate the burner for an extended period of time without cookware on
the grate. The finish on the grate may chip without cookware to absorb the heat.
•
Be sure the burners and grates are cool before you place your hand, a pot holder,
cleaning cloths or other materials on them.
Cookware
Requirements
•
Flat bottom and straight sides
•
Tight-fitting lid
•
Well-balanced with the handle weighing less than the main portion of the pot or
pan.
Material characteristics
• Aluminum
: An excellent heat conductor. Some types of food may cause the
aluminum to darken. However, anodized aluminum cookware resists staining and
pitting.
• Copper
: An excellent heat conductor but discolors easily.
• Stainless steel
: A slow heat conductor with uneven cooking performance but is
durable, easy to clean, and resists staining.
• Cast-Iron
: A poor conductor but retains heat very well.
• Enamelware
: Heating characteristics depend on the base material.
• Glass
: A slow heat conductor. Use only glass cookware that is specified for
cooktop cooking or oven use.
• Heatproof Glass-Ceramic:
Can be used for either surface or oven cooking. It
conducts heat very slowly and cools very slowly. Check cookware manufacturer's
directions to be sure it can be used on a gas cooktop.
Size limitations
10 inches
or more
10 inches
or more
CAUTION
•
Do not place a pan or pot with a bottom
diameter of about 10 inches or more on
the RF or LF burner.
NA9300K_DG68-00842A-05_EN+MES+CFR.indb 13
2018-08-29 12:46:49