English 21
Installation instructions
Step 9. Install the grates.
NOTE
Install the grates as instructed below for longest life. When installed properly, the
openings in the grates are centered over the burners.
The three cooktop grates are designed to fit in specific positions on the cooktop.
For maximum stability, these grates should only be used in their proper positions.
•
Please place the grate marked with the letter ‘L’ on the left side, and the one with
the letter ‘R’ on the right side.
•
The middle grate must be installed with the filled-in section, marked ‘BACK’,
oriented towards the back of the cooktop.
The back of the right grate is notched to help you orient the grates correctly. See
the illustration below.
To replace the grates correctly, follow these steps:
1.
Locate the notch on the back of the right grate.
2.
Orient the right grate so that it is on the right side of the cooktop with the
notch in the back.
3.
Gently lower the legs of the right grate into the corresponding dimples on the
cooktop.
4.
Gently lower the legs of the remaining two grates into the corresponding
dimples on the cooktop as shown in the illustration.
Back of left grate
Back of center grate
Back of right grate
Install_NA9300K_DG68-00841A-01_EN+MES+CFR.indb 21
12/12/2016 9:31:43 PM
