Samsung N128 User Manual Download Page 73

Page: 73 / 82

Battery Usage Time Information

A battery is an expendable supply, so when

using it over a long time, the capacity/battery

life is shortened. If the battery life is reduced

to under half of its initial time, we recommend

purchasing a new battery.
For long periods of not using the battery,

keep the battery after discharging it. This

extends the battery life time.

Extending the Battery Usage

Time

Decreasing the LCD Brightness

Press the

+ (

) keys on the keyboard

to decrease the LCD brightness to extend the

battery usage time.

You can only use this function

after installing Windows XP

and installing the

Easy Display

Manager

program with the s

ystem

software media disk

Using the Battery Calibration

Function

When charging/discharging the battery

repeatedly for a short time only, the battery

usage time may be reduced by the difference

between the actual battery charge and the

remaining charge display.
In this case, the actual battery charge and

the remaining charge display will be the

same by discharging the battery completely

using the Battery Calibration function, and

then recharging it again.

Disconnect the AC power adapter after

turning off the computer.

Restart your computer and press the

button when the Samsung logo

appears, to start the BIOS Setup.

Summary of Contents for N128



















































































Search results

Summary of Contents for N128

Reviews:

Related manuals for N128

Brands by name

Popular brands

Samsung N128, User Manual

Search results

Summary of Contents for N128

Reviews:

Related manuals for N128

Brands by name

Popular brands