Samsung N128 User Manual Download Page 52

Page: 52 / 82

Keyboard

Shortcut key functions and procedures are discussed in the following sections.



The keyboard is supplied according to the corresponding country.



The Keyboard image and color may differ from the actual Keyboard.



You can only use the hot keys and the pre-determined shortcut keys (Windows key,

application key, volume key, etc.) after installing Windows XP.



Some model is not supplied System Software Media depending on your computer

model.

Shortcut Keys

You can use the following functions by pressing the keys below with the

key.

Fn+

Name

Function

REST

(Sleep Mode)

Switches to Sleep mode. To wake the computer up, press the Power
button.

Gauge

Shows the remaining battery charge.
You can only use this function when the Easy Display Manager program is
installed.

Euro

Enters the Euro monetary unit symbol.
This key may not be provided depending on the keyboard type.

CRT/LCD

Switches the screen output to the LCD or external monitor when an
external monitor (or TV) is connected to the computer.

Backlight

Turns the LCD backlight on or off.

Mute

Mutes or cancels mute.

Samsung

Magic Doctor

System diagnosis, recovery and Internet consultation program, Samsung
Magic Doctor, will be launched. (Optional)

Summary of Contents for N128



















































































Search results

Summary of Contents for N128

Reviews:

Related manuals for N128

Brands by name

Popular brands

Samsung N128, User Manual

Search results

Summary of Contents for N128

Reviews:

Related manuals for N128

Brands by name

Popular brands