background image

10

Chapter 1 

Getting Started

Connect the power cord to an outlet or 

multiple power plug (extended cable) with 

a ground terminal.

Failing to do so may result in electric shock.

If water or another substance enters 

the power input jack, AC adapter or the 

computer, disconnect the power cord and 

contact the service center.

Damage to the device within the computer 

may cause electric shock or fire hazard.

Keep the power cord or outlet clean so that 

they are not covered with dust.

Failing to do so may result in fire.

AC Adapter Usage Precautions

Connect the power cord to the AC adapter 

firmly.

Otherwise, there is a danger of fire due to an 

incomplete contact.

Use only the AC adapter supplied with the 

product.

Using another adapter may cause the screen to 

flicker.

Do not place heavy objects or step onto 

the power cord or AC adapter to avoid 

damaging the power cord or AC adapter.

If the cord is damaged, there is a danger of 

electric shock or fire.

 

Warning

Failing to follow instructions marked with this symbol may 

cause personal injury and even fatality.

Safety Precautions

Summary of Contents for N-Series

































































































































Reviews: