Samsung MWR-WW10N, Installation Manual

Page: 14 / 24

Wired Remote Controller Installation
14 English
Wired Remote Controller Installation
Wir
ed Remot
e C
ontr
oll
er
Installation
Initializing Your Wired Remote Controller Communication
Wired remote controller must be initialized if installation status changes.
࡛ Changing number of indoor unit or their address
1 Press the and buttons at the same time for more than 5 seconds.
࡛ Your Wired Remote Controller will be initialized, and the device will search for the indoor units connected to
your Wired Remote Controller again.
Errors displayed on the Wired Remote Controller
Error codes for the Wired Remote Controller and the product connected to your Wired Remote Controller will be
displayed in the LCD display.
Wired Remote Controller error codes
Display Contents
Communication error between remote controller and the Hydro unit/Hydro unit HT
Communication error between master and slave remote controller
Tracking error between remote controller and the Hydro unit/Hydro unit HT
Error due to exceeding maximum numbers of Hydro unit installation (16 units)
Error caused by installing mixed models
Remote controller's temperature sensor is disconnected or has problem
Uɇϩɇʪθθͱθͱ͝θʪ͔ͱϩʪʀͱ͝ϩθͱ̷̷ʪθ࣑đʪ͔ͱθцθʪɇʒࢩиθ̈ϩʪʪθθͱθ࣒