28
Self-test mode of wired remote controller
Use of self-test mode
1. You can use the self-test mode when you set the 'self-test entering' as 'Yes' in the installation/service mode.
f
f
Select main menu 1
sub-menu 2 in the installation / service mode.
2. When using the self-test mode of the wired remote controller, press the
[＜]
and
[＞]
buttons for more than 3 seconds.
3. You can operate the self-test mode as follows.
f
f
Load list: When pressing the corresponding button, you can set the load On or Off.
Enter button
Operating part
LCD display
Water pump
Booster heater
DHW valve
2 way valve
DVM HT_HE RC-EU_IM_EN_DB68-03973A-06.indd 28
2017-05-25 오후 4:18:34
