E-
4
Getting Started
You have just purchased a wired remote controller and it has
been installed by your installation specialist.
Your User’s Manual contain much valuable information on using
your wired remote controller. Please take the time to read them as
they will help you take full advantage of the unit’s features.
In the manual, you will find a series of step-by-step procedures for each
function available.
The illustrations in the step-by-step procedures use 3 different symbols:
PRESS
PUSH
HOLD DOWN
Wired Remote Controller
The wired remote controller is installed on the wall.
Press the
button after cleaning the air filter.
The remote controller will display the filter sign to alert the user to
clean the filter and turn off the display when the
button is
pressed.
Restricted
will be displayed if the
button is pressed for duct type
indoor units.
Restricted
will be displayed if the indoor unit does not support the
function of the pressed button.
Note
7-day schedule
time setup
Indoor temperature
Check button
Schedule clock
Operating mode
Fan speed
Time/schedule reset button
Filter reset button
Mode selection
MWR-WS00_IB_E_25179.indd 4
2006-03-28 ｿﾀﾈﾄ 3:26:44
Summary of Contents for MWR-WS00
Page 22: ......
