E-
18
Additional Functions (Continued)
Monitoring and Setting the Indoor Temperature
Compensation for the Wired remote controller
In order to monitor and set the indoor temperature
compensation using the wired remote controller, hold down the
and
buttons at the same time for 5 seconds.
1
The menu will display .
Press the
button until is displayed.
2
Press the
button.
The positive and decimal value of indoor temperature of
indoor unit will be displayed in turns. The set compensation
value will flicker.
3
Press the
buttons to set the compensation value.
Note
The temperature will be adjusted by
0.1°C(0.1°F) when the
buttons are
pressed.
The compensation value range can be set is
between –9.9°C~ 9.9°C.
4
Press the
button to save the changed setting.
You will move to the menu selection display.
Note
Press the
button anytime during setup to exit
without setting.
Current Temp.
(24.1°C)
Compensation value
(+2.3°C)
Menu No.
The compensation value will be maintained even after
initialization.
MWR-WH00_IM_E_31219-1.indd 18
2009-12-14 ｿﾀﾀ・9:01:42
Summary of Contents for MWR-WH00
Page 31: ...E 31 ENGLISH Memo ...
Page 32: ......
