Samsung MultiXpress SL-X4220RX Service Manual Download Page 522

Page: 522 / 609

4. Troubleshooting

2) Noise of ADF Hinge / Crack of ADF Hinge / ADF can’t be fixed as open

•

Symptom

When ADF is opened or closed, the noise from its hinge happened.

ADF hinge is cracked.

When the ADF unit is lifted to access the platen glass, the unit should remain at a 50° angle (± 10°). ADF unit
does not remain open as expected.

•

Troubleshooting

1) Remove the ADF connector cover.

2) Remove the connector and 1 screw.

3) Lift up and remove the ADF unit.

4) Remove 4 screws from the each hinge unit. And then replace the hinge unit with new one.

5) Reassemble the ADF unit again.

4-272

Summary of Contents for MultiXpress SL-X4220RX

















































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MultiXpress SL-X4220RX

Reviews:

Samsung MultiXpress SL-X4220RX, Service Manual, Page: 522 / 609

Search results

Summary of Contents for MultiXpress SL-X4220RX

Reviews: