Samsung Msys 755P User Manual Download Page 33

Page: 33 / 216

ETTING

TARTED

1.16

To connect a telephone and/or answering machine to your
machine, plug the cord of your extension phone or

answering machine into the

EXT

jack.

UK users should plug the cord of the extension phone into

the supplied TAM lead and plug the cord of the TAM lead

into the

EXT

jack on the back of your machine.

OTES

• Use the TAM lead and the telephone line cord supplied with your

machine.

• In the United Kingdom, if a three-wire type (SHUNT-wire, found

on older equipment) telephone or answering machine is

connected to the EXT jack on the machine, the external

equipment will fail to ring when receiving an incoming call as the

machine is designed to operate with the latest technology. To

prevent this incompatibility, use two-wire (newer equipment)

telephones or answering machines.

➜

To an extension

phone or answering

TAM lead

(For UK users only)

Summary of Contents for Msys 755P

























































































































































































































Search results

Summary of Contents for Msys 755P

Reviews:

Related manuals for Msys 755P

Brands by name

Popular brands

Samsung Msys 755P, User Manual

Search results

Summary of Contents for Msys 755P

Reviews:

Related manuals for Msys 755P

Brands by name

Popular brands