English - 14
SETTING COOKING TIMES & POWER LEVELS
Your microwave allows you to set up to two different
stages of cooking, each with its own time length and
power level. The
MWO Button
lets you control the
heating intensity from Warm (1) to High (0).
ONE-STAGE COOKING
For simple one-stage cooking, you only need to set a cooking time. The
power level is automatically set to High. If you want to set the power to any
other level, you must set it using the
MWO Button
.
1.
Use the number buttons to set a cooking time. You
can set a time from one second to 99 minutes, 99
seconds. To set a time over one minute, enter the
seconds too.
For example, to set 20 minutes,
enter 2, 0, 0, 0.
2.
If you want to set the power level to something other
than High, press the
MWO Button
, then use the
number buttons to enter a power level.
Power Levels
1 = PL:10
(Warm)
6 = PL:60
(Simmer)
2 = PL:20
(Low)
7 = PL:70
(Medium high)
3 = PL:30
(Defrost)
8 = PL:80
(Reheat)
4 = PL:40
(Medium low)
9 = PL:90
(Sauté)
5 = PL:50
(Medium)
0 = PL:Hi
(High)
3.
Press the
Start
button to begin cooking. If you
want to change the power level, press Pause/
Cancel before you press Start, and re-enter all of the
instructions.
Some recipes require different stages of cooking at different temperatures.
You can set multiple stages of cooking with your microwave.
SETTING THE TIME
Your microwave oven has an inbuilt clock. When power is supplied, “12:00”
is automatically displayed on the display.
Please set the current time.
• When you first install your microwave oven.
• After a power failure
Do not forget to reset the clock when you switch to and from summer
and winter time.
Auto energy saving function
If you do not select any function when appliance is in the middle of
setting or operating with temporary stop condition, function is canceled
and clock will be displayed after 25 minutes.
Oven Lamp will be turned off after 5 minutes with door open condition.
1.
Press the
Clock
button.
2.
Use the number buttons to enter the current time.
You must press at least three numbers to set the
clock. If the current time is 5:00 enter, 5, 0, 0.
3.
When 5 seconds has elapsed, “
ENTER
” indicator flash and “
Cloc
” will
be displayed.
4.
Press
Clock
button again. The “
:
” will blink,
indicating that the time is set.
, ,
, , ,
MS34F606MAT_SA_DE68-04176A-03_EN.indd 14
2014-04-16 �� 8:24:53
