manualshive.com logo in svg

Samsung ML--6100, User Manual

Share
Download
Samsung ML--6100 User Manual Download Page 56

4.

3

Printing

Setting Properties 

The ML-6100 printer driver’s Print Setup dialog box allows you to set
various printer properties.
Note: Most Windows applications will override settings you specify in 

the printer driver. Change all print settings available in the software 
application first, and any remaining settings with the printer driver.

The Samsung 6100 Series PCL6 Print Setup dialog box includes five tabs:
• Paper/Output
• Image Quality
• Overlays
• Watermarks
• About

Note: To use the PCL5e driver, follow the same instructions.

Overlays and Watermarks are not available in the PCL5e driver for
Windows 3.1x/95/98 and NT 4.0.

The basic capabilities of the printer driver are described here. For detailed
explanations and assistance with specific settings, use the driver’s Help
functionality, accessed by clicking the Help button in the dialog box.

Summary of Contents for ML--6100











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands