Samsung ML--6100, User Manual

Page: 30 / 106

2.
13
Printer Setup
Software Utilities Installation
Installing the USB Port Driver (Windows 98)
The USB port driver must be installed in order to print to the ML-6100 via
a USB connection. Currently, USB printing is only available through
Windows 98.
1. Insert the ML-6100 CD-ROM into your CD-ROM drive. If Windows
automatically runs the CD-ROM, skip to Step 3.
2. Select
Run
from the
Start
menu. Type
d:\setup.exe
on the command
line (where “d” is your CD-ROM drive letter), then click
OK
.
3. Select the appropriate language, then select
USB Port Driver
.
Installing the RCP and SM (Windows)
The RCP (Remote Control Panel) and the SM (Status Monitor) software
are Windows-based programs that allow the user to set default printer
values as well as monitor the status of the printer.
These two utilities can be used when the printer is connected via the
parallel and USB(Windows 98 only) interface.
1. Insert the ML-6100 CD-ROM into your CD-ROM drive. If Windows
automatically runs the CD-ROM, skip to Step 3.
2. For Windows 95/98/NT 4.0:
Select
Run
from the
Start
menu. Type
d:\setup.exe
on the command
line (where “d” is your CD-ROM drive letter), then click
OK
.
For Windows 3.1x:
Open the
Program Manager
and select
Run
from the
File
menu.
Type
d:\setup16.exe
on the command line (where “d” is your
CD-ROM drive letter), then click
OK
.
3. Select the appropriate language.
4. For Windows 3.1x, 95 and 98, select
RCP
and
SM
.
For Windows NT 4.0, select
RCP
.