5. Proceed now to remove the screws of the end cover on the right (contact side) and pry open with the small screwdriver at
different consecutive points until separation is accomplished. Even though the cover seems to be formed by two sections, it is a
unit with a rather thin centerpiece. Worth noting also the way the chip is internally held and the need to be replaced prior to
reinstalling the cover.
6. Repeat the removal of the left end covers in its two parts, starting with the top one and then the lower one.
This will allow separation of the cartridge in two sections.
Begin working in the image section.
SAMSUNG ML-2165W (MLT-D101S) TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2013 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
