Samsung MIM-E03CN, Installation Manual

Page: 37 / 48

Concrete curing function
When pipes of floor heating are installed, operation for reinforcing concrete curing is applied. (Period of operation: 23 days)
Entering procedure
1. After turning off the DIP switch K3 (3rd switch of SW03) of control kit (Default ON), turn off and turn on the control kit. The
operation for concrete curing starts automatically. (If blackout occurs and communictation restarts later, operation will
continue.)
2. Temperature of discharge water is controlled as time goes on like below.
Ռ
ՍՋ
ՍՐ
ՎՋ
ՎՐ
ՏՋ
ՏՐ
ՐՋ
ՐՐ
ՑՋ
Ս Վ Տ Ր Ց Ւ Փ Ք ՌՋ ՌՌ ՌՍ ՌՎ ՌՏ ՌՐ ՌՑ ՌՒ ՌՓ ՌՔ ՍՋ ՍՌ ՍՍ ՍՎ [Day]
[Temp.]
Classification
Initial
Heating
Step raise Heating Step down
Total
(Hour)
Time 96 72 24 24 24 24 24 144 24 24 24 24 24 552
Temperature 30 55 30 35 40 45 50 55 50 45 40 35 30 -
3. Remaining days are displayed on the wired remote controller during operation but key operation is unavailable.
Remaining days are
displayed.
Concrete Curing
Remaining days:
❋
If an error is displayed, concrete curing function does not work.
37
ENGLISH