I
NSTALLING THE
I
NDOOR
U
NIT
E-
2
3
ENGLISH
Assigning Address to Indoor Unit
Before installing the indoor unit,assign an address to the indoor unit
according to the air conditioning system plan.
1
The address of the indoor unit is assigned by adjusting MAIN(SW02) switch.
2
K1 K2 K3 K4 K5 K6 K7 K8 K9 K10K11 K12
The MAIN address is for communication between the indoor unit and the outdoor
unit. Therefore, you must set it to operate the air conditioner properly.
3
It is required to set the RMC address if you install the wired remote controller
and/or the centralized controller.
4
If you install optional accessories such as the wired remote controller, centralized
controller, etc. see an appropriate installation manual.
5
If an optional accessory is not installed, you do not have to set the RMC
address. However, adjust K1 and K2 switches of the SW05 DIP switch to "ON"
position in this case.
6
Set the MAIN address by adjusting the rotary switch(SW02) from 0 to 9. Each
indoor unit connected to the same outdoor unit must have different address.
7
MH023FEEA IM_E_24373 11/18/05 3:52 PM Page 19
Summary of Contents for MH050FXEA2B
Page 32: ......
