E-
18
C
OMPLETING THE
I
NSTALLATION
Drain hose installation
Drain hose connection port
Cable clamp
Indoor
unit
Cable-tie
Insulation drain hose
Insulation cover drain
CAUTION
Must fit tightly against body
without any gap.
No gap
Care must be taken when installing the drain hose for the indoor unit to
ensure that any condensate water is correctly drained outside.
The drain hose can be installed to the right of the base pan.
1
Unscrew the 4 tapped screws to remove the cover of the drain hose
connection port.
2
Insert the flexible hose to the drain hose port.
Note
Fix the flexible hose to the indoor unit with the supplied cable
clamp securely.
(Use the screwdriver to fix the flexible hose securely.)
3
Install the drain hose so that its length can be as short as possible.
Internal diameter of the drain hose should be the same or slightly bigger
than the external diameter of the drain hose port.
Inner diameter of the drain hose
Note
Give a slightly slant to the drain hose for proper drainage of
condensate.
Fix the flexible hose to the PVC with the supplied cable tie
securely.
4
Wrap the drain hose with the insulation drain as shown in figure and secure it.
32mm(Inner diameter)
MH
FEEA
MH052FUEA
Cable-tie
Clamp
Insulator
Flexible hose
Summary of Contents for MH050FXEA2B
Page 32: ......
