Samsung MCM-B102, Installation Manual

Page: 2 / 24

Safety Precautions
◆
Read this installation manual carefully before
installation and check whether the power distribution
unit is installed properly.
◆
Do not attempt to install or repair the power
distribution unit by yourself.
◆
Always consult an authorized service personnel for
repair.
◆
When moving, consult an authorized service
personnel for disconnection and reinstallation of the
power distribution unit.
◆
Ensure that the wall is strong enough to support the
weight of the power distribution unit.
◆
The power distribution unit must be installed with the
rated power supply.
◆
The power distribution unit must be installed
according to the national electrical rules by an
installation specialist.
◆
Consult an authorized installation center on how to
dispose the power distribution unit.
WARNING
CAUTION
◆
Do not use inflammable gases near the power
distribution unit.
◆
Do not install the power distribution unit in a location
where it will come into contact with combustible
gases, machine oil, sulphide gas, etc.
◆
Avoid a location where acid/alkali solution or special
spray is used.
◆
Install the power distribution unit in a location that is
not exposed to direct sunlight and where the
temperature range is between 0°C and 39°C.
◆
Do not let water into the power distribution unit.
◆
Do not apply pressure to the cable.
The cable may break and cause fire.
◆
Do not press the buttons with a sharp object.
◆
Do not connect the power cable to the control terminal.
◆
Ensure that the power distribution unit does not affect
other electronic devices when installed in a hospital
or other particular places.
E-
2
This installation manual explains how to install the power distribution unit.
See the appropriate installation manual for other optional accessories.
MCM-B102 IM_E_26318 7/25/06 1:43 PM Page 2