16
This document can not be used without Samsung’s authorization.
3. Disassembly and Reassembly
3-6 Replacement of Fuse
Parts
Explanation Photo
Explanation
Fuse
7KHIXVHLVORFDWHGRQWKHQRLVH¿OWHU
1.
Disconnect power and remove grille and
Assembly Control Box.
2.
Replace the fuse.
3.
When 20A fuse blows out by the operation
of interlock monitor switch failure, replace
the primary interlock switch, secondary
interlock switch, door sensing switch,
interlock monitor switch and power relay.
4.
When the above four switches operate
properly, check if any other part such as the
control circuit board, blower motor or high
voltage transformer is defective.
3-7 Replacement of Drive Motor
Parts
Explanation Photo
Explanation
Drive
Motor
1.
Disconnect power and remove Base
bottom screws(5).
2.
Remove Base bottom
3.
Remove the screw securing turntable motor
wire cover.
4.
Remove turntable motor wire cover.
5
Disconnect the turntable motor drive.
6.
Remove turntable motor screws(1) and pull
the turntable motor out.
7.
When replacing the drive motor, be sure to
remount it in the correct position with the
coupler.
8.
Connect all the leads to the drive motor.
