13
This document can not be used without Samsung’s authorization.
3. Disassembly and Reassembly
3-4 Replacement of Magnetron
Parts
Explanation Photo
Explanation
Magnetron
Remove the magnetron including the shield
case, permanent magnet, choke coils and
capacitors (all of which are contained in one
assembly).
1.
Disconnect all lead wires from the
magnetron.
2.
Cut the rib of Bracket Duct Rear by using
nippers.
3.
Remove nuts (4) securing the magnetron
to the wave guide.
4.
Take out the magnetron very carefully.
NOTE1:
When removing the magnetron, make sure that it antenna does not hit any adjacent parts, or it may be
damaged.
NOTE2:
When replacing the magnetron, be sure to remount the magnetron gasket in the correct position and make
sure the gasket is in good condition.
PRECAUTION
During replacement, be certain R.F. Anode gasket is in place around anode stub.
PERFORM MICROWAVE LEAKAGE TEST
