Samsung LS3165H52HR Service Manual Download Page 19

Page: 19 / 88

DISASSEMBLY AND REASSEMBLY

3-2) Freezer Door

Part name

How To Do

Descriptive Picture

Door Freezer

Removing the Front leg
cover.

1. Open the freezer and refrigerator

doors.

2. Take off the front leg cover by

turning the three screw counter-
clockwise.

Removing the Water supply
line.

1. Separate the Water Supply Line

from the Refrigerator by pressing the
coupler (2)

2.pulling the water tube (1) away.

CAUTION

If a red clip is on the
coupler, it must be
removed before
removing the tube.

① ②

After raising the out door, insert the supplied SHIM HINGE
MIDDLE in the gap between Show case of fridge and the
HINGE-SHAFT.

SHIM HINGE MIDDLE are enclosed with the refrigerator.
The thickness of RING is 1 mm.

CAUTION

Keep the Rings out of the reach of children and make sure that children do not play with them or put
them into their mouths.

CAUTION

Don’t make Show case door higer than inner case door.
– Show case door can break away from STOPPER (HINGE)

- MAKING MINOR ADJUSTMENTS BETWEEN SHOW CASE AND INNER CASE OF FRIDGE

Summary of Contents for LS3165H52HR

























































































Search results

Summary of Contents for LS3165H52HR

Reviews:

Related manuals for LS3165H52HR

Brands by name

Popular brands

Samsung LS3165H52HR, Service Manual

Search results

Summary of Contents for LS3165H52HR

Reviews:

Related manuals for LS3165H52HR

Brands by name

Popular brands