Samsung LN23R71BAX, Service Manual

Page: 138 / 168

10 Operating Instructions and Installation
10-4
1. TV, DVD, STB, CABLE, VCR
Press to operate your TV, DVD, STB, CABLE
(box), or VCR
2. POWER
Turns the TV on and off.
3. NUMERIC BUTTONS
Press to change the channel.
4. -/--
Press to select channels over 100.
For example, to select channel 121, press " - ",
then "2", then "1".
5. CH LIST
Used to display Channel Lists on the screen.
6. TV
Selects the TV mode directly
7. VCR/DVD Functions
- Rewind, Stop/Play, Pause/Fast, Forward
8. VOL / VOL
Press to increase or decrease the volume.
9. (MUTE)
Press to temporarily cut off the sound.
10. MENU
Displays the main on-screen menu.
11. RETURN
Returns to the previous menu.
12. S.MODE
Press to select the sound mode.
13. P.MODE
Press to select the picture mode.
14. DNIe(Digital Natural Image engine)
DNIe Demo Demo/On/Off
15. MTS
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
16. PIP
Picture-in Picture ON/OFF.
17. SRS
Selects SRS TruSurround XT mode.
18. When pressing this button, a number of
buttons on the remote control (e.g. TV, DVD,
STB, CABLE, VCR, MUTE, VOL and CH
buttons) light up for a few seconds and then
turn off to save power. This function is
convenient for using the remote at night or
when dark.
19. SOURCE
Press to display all of the available video
sources.
20. PRE-CH
Turns to the previous channel.
21. SLEEP
Press to select a preset time interval for
automatic shut off.
22. HDMI
Selects the HDMI mode directly.
23. CH / CH
Press to change channels.
24. EXIT
Press to exit the menu.
25. UP / DOWN / LEFT / RIGHT / ENTER
Use to select on-screen menu items and
change menu values.
26. INFO
Use to see information on the current broad
cast.
27. CAPTION
Controls the caption decoder.
28. STILL
Press to stop the action during a particular
scene.
Press again to resume normal video.
29. P.SIZE
Picture size selection.
30. PIP FUCTIONS
SOURCE : Press to select a signal from an
external source in PIP.
POSITION : Change the position of the PIP
screen.
CH : Displays the available channels in
sequence. (These buttons change channels in
the PIP window only.)
31. SET
Sets the remote to control your TV, VCR,
Cable, DVD, or Set-Top Box
RESET
When your remote does not work, change the
batteries and press the RESET button for 2-3
seconds before use.