English -
Setting up
The following settings are to use functions.
to use the function, hdmI Control must be set to on
.
Press the
button.
Press the ▲ or ▼ button to select Setup, then press the
EntEr
button.
.
Press the
EntEr
button to select (HDMI-CEC), then press the
EntEr
button.
,
Press the ▲ or ▼ button to select On, then press the
EntEr
button.
The (HDMI-CEC) function is enabled.
If you select Off, (HDMI-CEC) is disabled.
Setting an device to turn off automatically when the tV is turned off
.
Press the ▲ or ▼ button to select
auto turn off
, then press the
EntEr
button.
.
Press the ▲ or ▼ button to select On, then press the
EntEr
button.
The Auto turn off function is enabled.
If you select Off, the Auto turn off function is canceled.
Press the
ExIt
button to exit.
The Select Device setting of the TV remote control is to be set to TV to use the
function.
If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off.
However, if the device is recording, it may not be turned off.
When the (HDMI-CEC) function is disabled, all the related operations are deactivated.
Scanning and Switching between devices
.
Press the
button.
devices connected with the TV are listed.
.
Press the ▲ or ▼ button to select to a particular device and press the
EntEr
button.
It is switched to the selected device.
.
If you cannot find a device you want, press the ▲ or ▼ button to select Searching
Connections, then press the
EntEr
button.
The meassage Configuring connection... is displayed.
When searching devices completes, the connected devices are listed in the
menu.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
The time required to scan for devices is determined by the number of connected
devices.
When the device scan is complete, the number of found devices is not displayed.
Although the TV automatically scans devices when it is turned on using the
poWEr
button, devices connected when the TV
is on or under a specific circumstance are not displayed in the device list. Therefore select Searching Connections menu to
search devices.
If you have selected external input mode by pressing the
SourCE
button, you cannot use the function. Make sure to
switch to an device by using the button.
Setup
hdmI Control
: off
auto turn off
: off
Searching Connections
Enter
return
move
off
on
Enter
move
recevier:
on
Connect recorder
Setup
Air 28
Exit
Setup
hdmI Control
: on
auto turn off
: off
Searching Connections
Enter
return
move
no
yes
Enter
Exit
move
recevier:
on
Connect recorder
Setup
air
Setup
hdmI Control
: On
►
auto turn off
: yes
►
Searching Connections
►
Enter
return
move
BN68-01178A-Eng.indd 78
2007-02-15 �� 8:59:07
