English-86
Installation Notes
Installing the Wall Mount Kit (LN-S4695D)
Refer to the correct installation guide according to your wall bracket.
This LCD TV accepts a 600 mm x 400 mm VESA-compliant mounting interface pad.
1. Contact a technician for installing the wall bracket.
2. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to perform the wall installation.
3. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Parts (Wall attachment panel is sold separately. Check with your dealer.)
Only use the components and accessories shipped with the panel.
Wall-Bracket
Right: 1
Left: 1
Screw
11
M8 X L40
Anchor : 11
Plastic Hanger : 4
Screw
11
M4 X L20
Wall-Bracket
Accessories
How to assemble the Wall Mount Bracket
1
Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
Wall Bracket
Captive Screw
Hinge
(Left)
There are two hinges
(left and right). Use the
correct one.
Hinge
(Right)
Before drilling into the wall, check if the length between the two
locking holes at the back of the product is correct. If the length is too
short or long, loosen all or some of the 4 screws on the wall bracket
to adjust the length.
Length between the
two locking holes
Check the installation diagram and mark the drill points on the wall.
Use the 5.0 mm bit to drill holes deeper than 35 mm.
Fix each anchor in the corresponding hole. Match each of the
brackets and hinge holes to the corresponding anchor holes and
insert and tighten the 11 screws
.
BN68-01047J-01Eng.qxd 7/13/06 4:51 AM Page 86
