English-20
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected
to the TV (i.e., an antenna or cable system).
Memorizing Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels.
After the available channels are memorized, use the CH
and CH
buttons to scan through the channels.
This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (channel manager).
Selecting the Video Signal Source
1
Press the
MENU
button. Press the
or
button to select “Channel”,
then press the
ENTER
button.
2
Press the
or
button to select “Antenna”, then press the
ENTER
button. Press the
or
button to select “Air” or “Cable”, then press the
ENTER
button.
3
Press the
or
button to select “Auto Program”, then press the
ENTER
button.
continued...
BN68-01047J-01Eng.qxd 7/13/06 4:50 AM Page 20
