English-21
4
Press the
or
button to select the Antenna connection,
then press the
ENTER
button.
When selecting Cable TV system:
Press the
ENTER
button to start the auto program.
By default, the cable TV system is set to “STD”.
If you want to select another type of cable system,
press the
or
button to select “STD”, “HRC” or “IRC”.
5
Press the
ENTER
to start the auto program.
The TV begins memorizing all available stations.
Press the
ENTER
button at any time to interrupt the
memorization process.
Select “Return” by pressing the
or
button, then
press the
ENTER
button to return to the previous
menu. Press the
EXIT
button to exit.
•
Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable” antenna signals
•
STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
•
The TV must be connected to air/cable in order to receive digital
TV signals. Even if a particular channel is deleted from the memory,
you can always tune to that channel directly by using the number buttons
on the remote control.
•
When connecting Digital Cable to a Set-Top Box, Channel Memorization is
done on the STB.
To view the STB on your TV, select the Input jack the STB is connected to
with the
SOURCE
button on the remote control. (see page 32)
All available DTV and analog channels are automatically stored in memory.
BN68-01047J-01Eng.qxd 7/13/06 4:50 AM Page 21
