English-15
Turning the TV On and Off
Press the
POWER
button on the remote control.
You can also use the
POWER
button on the front of the panel.
Plug & Play Feature
When the TV is initially powered on, two basic settings proceed automatically and subsequently:
1
Press the
POWER
button on the remote control.
The message “Menu language, Channels and Time will
be set.” is displayed.
Press the
ENTER
button, then “Select the language
of the OSD” menu is automatically displayed.
3
Press the
ENTER
button to enter the language.
Press the
or
button to select language, then the
ENTER
button.
“Select the antennas to memorize” menu is automatically
displayed.
4
Press the
or
button to memorize the channels of
the selected connection.
Press the
ENTER
button to select “Start”.
2
Press the
or
buttons to select “Shop” or “Home”,
then the
ENTER
button.
Operation
If the antenna is connected to ANT 1(AIR), select “Air” and if it is
connected to ANT 2 (CABLE), select “Cable”.
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select “Air + Cable”.
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the
or
button, then press the
ENTER
button.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
continued...
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the
MENU
button on the side panel of the TV for five seconds to return to Dynamic
(Home) mode.
BN68-01047J-01Eng.qxd 7/13/06 4:50 AM Page 15
