English-
17
Setting Up Your Remote Control
After it has been set up properly, your remote control can operate in five different modes:
TV, VCR, CABLE, DVD, or Samsung Set-top box. Pressing the corresponding button on the
remote control allows you to switch between these modes, and control whichever piece of
equipment you choose.
Note
The remote control might not be compatible with all DVD Players, VCRs and Cable boxes.
This remote control is only compatible with Samsung Set-top boxes.
Note on Using Remote Control Modes: VCR
When your remote control is in “VCR” mode, the volume buttons still control your TV’s volume.
1
Turn off your VCR.
2
Press the
MODE
button and make sure that the VCR LED
is illuminated.
3
Press the
SET
button on your TV’s remote control.
4
Using the number buttons on your remote control, enter
three digits of the VCR code listed on page 20 of this
manual for your brand of VCR. Make sure you enter three
digits of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
5
Press the
POWER
button on the remote control. Your VCR
should turn on if your remote is set up correctly.
If your VCR does not turn on after set-up, repeat steps
2, 3 and 4, but try one of the other codes listed for your
brand of VCR. If no other codes are listed, try each VCR
code, 000 through 086.
Setting Up the Remote to Operate Your VCR
O
P E R AT I O N
BN68-00751A-0
1
ENG.qxd 8/7/04 6:30 PM Page 17
