background image

English-

60

How to Reset the TV after the V-Chip
Blocks a Channel (‘Emergency Escape’)

If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and
the following message will appear: “Excessive rating”.

To resume normal viewing, tune to a different channel using the number buttons. Under certain
conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the
channels.
In this case, use the

MENU

button for an “emergency escape”:

Select the V-Chip on the Menu. Enter your PIN number, and press the 

ENTER

button to

temporarily disable the V-Chip Lock.

4

Repeatedly press the

UP/DOWN

buttons

to select a particular
MPAA category. (When a
category is selected, its
color changes to yellow.)

G

General audience (no restrictions).

PG

Parental guidance suggested.

PG-13

PG-13 (Parents strongly cautioned).

R

R (Restricted. Children under 17
should be accompanied by an adult).

NC-17

No children under age 17. 

X

X (Adults only).

NR

Not rated.

S

P E C I A L

F

E AT U R E S

Press the

ENTER

button to select “U” or “B”.

Press the 

MENU

button four times to save the settings and to clear all screens.

Note: The V-Chip will automatically block any category that is “more restrictive”.

For example, if you block the “PG-13” category, then “R” , “NC-17”  and “X”  will
automatically be blocked also.

BN68-00751A-0

1

ENG.qxd  8/7/04 6:32 PM  Page 60

Summary of Contents for LN-P267W
















































































Reviews: