192
(HDMI-CEC) isn't working.
The Problem
Try this!
does not
work.
Confirm that the device is an device. The system supports
devices only.
Check if the power cord of the device is properly connected.
Check the cable connections of the device.
Go to
System
and see if
(HDMI-CEC)
has been set to
On
.
Check whether the TV remote control is in TV mode.
Check whether the remote control is compatible.
may not function when certain functions are operational. (Channel Search,
Smart Hub, set up, etc.)
If you have disconnected and then reconnected the HDMI cable, scan for devices
again or turn your TV off and on.
I want to start
.
Check if the device is properly connected to the TV and then navigate to
the
System
menu to see if
(HDMI-CEC)
is set to
On
.
Once verified, select
TOOLS
button. A list appears. Select
(HDMI-CEC)
from the list and then a device.
I want to exit .
Select
View TV
from the menu.
Select a non- device from the
Source
list.
The message
"Connecting to
device..."
or "Disconnecting
from device"
appears on the screen.
You cannot use the remote control when you are configuring or switching
to a viewing mode. Use the remote control after the TV has completed the
configuration or has switched to a viewing mode.
