Samsung LED 6400 series, E-Manual

Page: 147 / 233

140 141
●
Positioner Settings : Configures the aerial positioner.
Positioner : Enables or disables the positioned control.
Positioner Type : Sets the positioned type between DiSEqC 1.2 and USALS (Universal Satellite
Automatic Location System).
–
My Longitude : Sets the longitude for my location.
–
My Latitude : Sets the latitude for my location.
–
Satellite Longitude Settings : Sets the longitude of user defined satellites.
User Mode : Sets the position of satellite aerial according to each satellite.
If you store the current position of satellite aerial according to a certain satellite, when the signal
of that satellite is needed, the satellite aerial can be moved to pre-populated position.
–
Satellite : Selects the satellite to set the position for.
–
Transponder : Selects a transponder from the list for signal reception.
–
Moving Mode : Selects the movement mode between discrete and continuous movement.
–
Step Size : Adjusts the step size degrees for the aerial rotation. Step Size is available when
Moving Mode is set to Step.
–
Go To Stored Position : Rotates the aerial to the stored satellite position.
–
Aerial Position : Adjusts and stores the aerial position for the selected satellite.
–
Store Current Position : Stores current position as the selected positioner limit.
Installer Mode : Sets limits to the scope of movement of satellite aerial or reset the position.
Generally, installation guide uses this function.
–
Limit Position : Selects the direction of the positioner Limit.
–
Aerial Position : Adjusts and stores the aerial position for the selected satellite.
–
Store Current Position : Stores the current position as the selected positioner Limit.
–
Go to zero : Moves the aerial to the reference position.
–
Reset positioner limit : Allows the aerial to rotate over the full arc.
●
Reset all settings : All satellite settings will be reset to the initial values.