Samsung LE32C550 User Manual Download

Page: 17 / 51

English

Basic Featur

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to

Normal

Night

■

: This mode provides an improved sound

experience compared to

Normal

mode, making almost

no noise. It is useful at night.

Speaker Select (External speaker / TV

speaker)

A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to

External Speaker

When

✎

Speaker Select

is set to

External Speaker

, the

volume and

MUTE

buttons will not operate and the

sound settings will be limited.
When

✎

Speaker Select

is set to

External Speaker

, you

should use these settings.

Speaker: Off , External Speaker: On

When

✎

Speaker Select

is set to

TV Speaker

, you

should use these settings.

Speaker: On , External Speaker: On

If there is no video signal, both speakers will be mute.

✎

Additional Setting

(digital channels only)

DTV Audio Level (MPEG / HE-AAC)

■

: This function

allows you to reduce the disparity of a voice signal
(which is one of the signals received during a digital TV
broadcast) to a desired level.

According to the type of broadcast signal,

✎

MPEG

/ HE-AAC

can be adjusted between -10dB and

0dB.
To increase or decrease the volume, adjust

✎

between the range 0 and -10 respectively.

SPDIF Output

■

: SPDIF (Sony Philips Digital InterFace)

is used to provide digital sound, reducing interference
going to speakers and various digital devices such as a
DVD player.

Audio Format

: During the reception of a digital TV

broadcast, you can select the Digital Audio output
(SPDIF) format from the options

PCM

Dolby Digital

By connecting to 5.1ch speakers in a Dolby

✎

Digital setup, maximize your interactive 3D sound
experience.

Audio Delay

: Correct audio-video mismatch, when

watching TV or video, and listening to digital audio
output using an external device such as an AV receiver.

Dolby Digital Comp (Line / RF)

■

: This function minimizes

signal disparity between a dolby digital signal and a
voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

Select

✎

Line

to obtain dynamic sound, and

to reduce the difference between loud and soft
sounds at night time.

Line

: Set the output level for signals greater or less than

-31dB (reference) to either -20dB or -31dB.

: Set the output level for signals greater or less than

-20dB (reference) to either -10dB or -20dB.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

Selecting the Sound Mode

When you set to

Dual l-ll

, the current

sound mode is displayed on the screen.

Audio

Type

Dual l-ll

Default

Stereo

Mono

Automatic

change

Stereo

↔

mono

Dual

Dual-I

↔

Dual-II

Dual-I

NICAM

Stereo

Mono

Automatic

change

Stereo

Mono

↔

stereo

Dual

Mono

→

Dual-I



Dual-II



Dual-I

If the stereo signal is weak and an automatic switching,

✎

occurs, then switch to the mono.
Only activated in stereo sound signal.

✎

Only available when the

✎

Input

source is set to

BN68-02688D_00Eng.indb 17

3/3/2010 10:31:21 PM

Summary of Contents for LE32C550




















































Search results

Summary of Contents for LE32C550

Reviews:

Related manuals for LE32C550

Brands by name

Popular brands

Samsung LE32C550, User Manual

Search results

Summary of Contents for LE32C550

Reviews:

Related manuals for LE32C550

Brands by name

Popular brands