background image

43

English

05

Other Information

Assembling the Cables

Enclose the cables in the Cable tie so that the cables are not visible through the 
transparent stand.

Anti-Theft Kensington Lock

The Kensington Lock is a device used to physically fix the system 
when using it in a public place. The appearance and locking method 
may differ from the illustration depending on the manufacturer. Refer to 
the manual provided with the Kensington Lock for proper use.

Please find a “

 

K

” icon on the rear of the TV.  

A kensington slot is beside the “

K

” icon.

1. 

Insert the locking device into the Kensington slot on the LCD TV 

1

 and turn it in the locking direction 

2

.

2. 

Connect the Kensington Lock cable 

3

.

3. 

Fix the Kensington Lock to a desk or a heavy stationary object.

The locking device has to be purchased separately.

 

The location of the Kensington Lock may be different depending 

 

on its model.

Securing the TV to the Wall

Caution

: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your 

children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious 
injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install 
the anti-fall device for safety purposes, as follows.

To avoid the TV from falling 

 

¦

Since the necessary clamps, screws, and string are not supplied, 

 

please purchase these additionally.

1. 

Drive the screws into the clamps and firmly fasten them onto the 
wall. Make sure the screws are firmly fixed into the wall. 

Screw Specifications

 

For a 32 ~ 40 Inch LCD TV: M6 

 

x

For a 46 ~ 55 Inch LCD TV : M8

 

x

2. 

Remove the screws from the centre back of the TV, put the 
screws into the clamps, and then fasten the screws onto the TV 
again.

3. 

Connect the clamps fixed onto the TV and the clamps fixed onto 
the wall with a strong string and then tie the string tightly.

Verify all connections are properly secured. Periodically check 

 

connections for any sign of fatigue for failure. If you have 
any doubt about the security of your connections, contact a 
professional installer.
Install the TV near to the wall so that it does not fall backwards.

 

It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

 

Untie the string before moving the TV.

 

1

2

3

Wall

<Optional>

Cable tie

BN68-02688A-LPREng(26-).indd   43

3/4/2010   7:01:17 PM

Summary of Contents for LE32C550




















































Reviews: