English-14
Plug and Play
When the set is initially powered ON, several basic customer settings
proceed automatically and subsequently.
The following settings are available.
1
If the set is in standby mode, press the
POWER
button on the
remote control.
Result:
The message
Start Plug & Play
is displayed. It
appears for a little while, and then the message
Check
antenna input.
is displayed with the
OK
selected.
2
Press the
ENTER
button.
Result:
The
Auto Store
menu is displayed with the
Start
selected.
3
Press the
ENTER
button.
Result:
The channel search will start and end automatically.
To stop the search before it has finished,
press the
ENTER
button with
Stop
selected.
4
Press the
ENTER
button.
Select the
Hour
or
min
by pressing the
or
button.
Set the
Hour
or
min
by pressing the
or
button.
(Refer to “
Setting and Displaying the Current Time
” on page 42)
5
Press the
ENTER
button to confirm your setting.
Result:
The message
Enjoy your watching.
is displayed, and
then the channel which has been stored will be activated.
You can also set hour and minute by pressing the number buttons
on the remote control.
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 14
