Samsung Lazett Combo SCX-4016 User Manual Download Page 141

Page: 141 / 225

ROUBLESHOOTING

Fax Problems

(For SCX-4216F)

Horizontal stripes

If horizontally aligned black streaks or smears appear:
• The toner cartridge may be installed improperly. Remove the

cartridge and reinsert.

• The toner cartridge may be defective. Install a new toner

cartridge. See “Installing the Toner Cartridge” on page 1.10.

• If the problem persists, the machine may require repair.

Contact a service representative.

Curl

If the printed paper is curl or paper does not feed into the
printer:
• Turn over the stack of paper in the input tray. Also try

rotating the paper 180° in the input tray.

Condition

Suggested solutions

AaBbCc
AaBbCc
AaBbCc

AaBbCc
AaBbCc

Condition

Suggested solutions

The machine is not
working, there is no
display and the buttons
are not working.

• Unplug the power cord and plug it in again.
• Ensure that there is power to the electrical receptacle.

No dial tone sounds.

• Check that the phone line is connected properly.
• Check that the phone socket in the wall is working by

plugging in another phone.

Summary of Contents for Lazett Combo SCX-4016


































































































































































































































Search results

Summary of Contents for Lazett Combo SCX-4016

Reviews:

Related manuals for Lazett Combo SCX-4016

Brands by name

Popular brands

Samsung Lazett Combo SCX-4016, User Manual

Search results

Summary of Contents for Lazett Combo SCX-4016

Reviews:

Related manuals for Lazett Combo SCX-4016

Brands by name

Popular brands