English-58
Installing the Wall Mount Kit (LA46M51B)
Refer to the correct installation guide according to your wall
bracket.
Components (Sold separately)
Installation Notes
How to assemble the Wall Mount Bracket
1
Insert and tighten the Captive Screw
in the direction of the arrow.
When done, mount the wall bracket
on the wall.
Before drilling into the wall, check if
the length between the two locking
holes at the back of the product is
correct. If the length is too short or
long, loosen all or some of the 4
screws on the wall bracket to adjust
the lenght.
Check the installation diagram and
mark the drill points on the wall, Use
the 5.0 mm bit to drill holes deeper
than 35 mm. Fix each anchor in the
corresponding hole. Match each of
the brackets and hinge holes to the
corresponding anchor holes and
insert and tighten the 11 screws
.
Contact a technician for installing the wall bracket.
Samsung Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Wall-Bracket
Hinge
Accessories
Plastic Hanger: 4
Screw :
4
M8 x L40
Screw :
11
M4 x L20
Anchor: 11
Captive Screw
Wall Bracket
Hinge
(Left)
Hinge
(Right)
There are two hinges
(left and right). Use the
correct one.
Length between the
two locking holes
Left: 1
Right: 1
Only use the components and accessories shipped with the product.
BN68-00926M-01Eng.qxd 11/1/05 4:24 AM Page 58
