Samsung iES4024GP Management Manual Download Page 452

Page: 452 / 712

Command Line Interface

4-116

aaa accounting dot1x

This command enables the accounting of requested 802.1X services for network
access. Use the

form to disable the accounting service.

Syntax

aaa accounting

dot1x

{

default

method-name

}

start-stop group

{

radius

server-group

}

no aaa accounting

dot1x

{

default

method-name

}

•

default

- Specifies the default accounting method for service requests.

•

method-name -

Specifies an accounting method for service requests.

(Range: 1-255 characters)

•

start-stop

- Records accounting from starting point and stopping point.

•

group

- Specifies the server group to use.

radius

- Specifies all RADIUS hosts configure with the

radius-server

host

command described on page 4-105.

- Specifies all hosts configure with the

tacacs-server

host

command described on page 4-110.

server-group -

Specifies the name of a server group configured with the

aaa group server

command described on 4-114.

(Range: 1-255 characters)

Default Setting

Accounting is not enabled
No servers are specified

Command Mode

Global Configuration

Command Usage

Note that the

default

and

method-name

fields are only used to describe the

accounting method(s) configured on the specified RADIUS or
servers, and do not actually send any information to the servers about the
methods to use.

Example

Console(config)#aaa accounting dot1x default start-stop group radius
Console(config)#

Summary of Contents for iES4024GP









































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iES4024GP

Reviews:

Related manuals for iES4024GP

Brands by name

Popular brands

Samsung iES4024GP, Management Manual

Search results

Summary of Contents for iES4024GP

Reviews:

Related manuals for iES4024GP

Brands by name

Popular brands