Samsung iES4024GP Management Manual Download Page 249 | Manualshive

Page: 249 / 712

background image

VLAN Configuration

3-193

3

•

Name

– Name of the VLAN (1 to 32 characters).

•

Status

– Shows if this VLAN is enabled or disabled.

-

Active

: VLAN is operational.

-

Suspend

: VLAN is suspended; i.e., does not pass packets.

•

Ports / Channel groups

– Shows the VLAN interface members.

CLI

– Current VLAN information can be displayed with the following command.

Creating VLANs

Use the VLAN Static List to create or remove VLAN groups. To propagate
information about VLAN groups used on this switch to external network devices, you
must specify a VLAN ID for each of these groups.

Command Attributes

•

Current

– Lists all the current VLAN groups created for this system. Up to 256

VLAN groups can be defined. VLAN 1 is the default untagged VLAN. VLAN 4093
is reserved for switch clustering and is not user-configurable or removable.

•

New

– Allows you to specify the name and numeric identifier for a new VLAN

group. (The VLAN name is only used for management on this system; it is not
added to the VLAN tag.)

•

VLAN ID

– ID of configured VLAN (1-4094, no leading zeroes).

•

VLAN Name

– Name of the VLAN (1 to 32 characters, no spaces).

•

Status

(Web) – Enables or disables the specified VLAN.

-

Enabled

: VLAN is operational.

-

Disabled

: VLAN is suspended; i.e., does not pass packets.

•

State

(CLI) – Enables or disables the specified VLAN.

-

Active

: VLAN is operational.

-

Suspend

: VLAN is suspended; i.e., does not pass packets.

•

Add

– Adds a new VLAN group to the current list.

•

Remove

– Removes a VLAN group from the current list. If any port is assigned to

this group as untagged, it will be reassigned to VLAN group 1 as untagged.

Console#show vlan id 1

Default VLAN ID : 1

VLAN ID:               1
Type:                  Static
Name:                  DefaultVlan
Status:                Active
Ports/Port Channels:   Eth1/ 1(S) Eth1/ 2(S) Eth1/ 3(S) Eth1/ 4(S) Eth1/ 5(S)

                       Eth1/ 6(S) Eth1/ 7(S) Eth1/ 8(S) Eth1/ 9(S) Eth1/10(S)
                       Eth1/11(S) Eth1/12(S) Eth1/13(S) Eth1/14(S) Eth1/15(S)
                       Eth1/16(S) Eth1/17(S) Eth1/18(S) Eth1/19(S) Eth1/20(S)
                       Eth1/21(S) Eth1/22(S) Eth1/23(S) Eth1/24(S)
Console#

«
...
247
248
249
250
251
...
»

Summary of Contents for iES4024GP









































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iES4024GP

Brand: Vonets Pages: 8

Protege PRT-PX16-PCB

Brand: ICT Pages: 34

ADSL 2/2+ VPN Firewall Router ADE-4300A/B

Brand: Planet Pages: 132

Brand: 8level Pages: 52

Brand: Kanguru Pages: 13

Brand: CELOT Pages: 34

JetFusion 2100 Series

Brand: Paradyne Pages: 296

Brand: OneAccess Pages: 47

Brand: l-com Pages: 2

Fibe-Air IP-10G

Brand: Ceragon Pages: 71

Brand: Enterasys Pages: 2

Passport 8608GTE

Brand: Nortel Pages: 10

Brand: Ultra Pages: 4

Brand: Hirschmann Pages: 8

Brand: Eaton Pages: 24

Brand: Epson Pages: 71

Brand: Epson Pages: 29

Brand: Epson Pages: 57

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands